ケーブリング・クロニクル

Electromagnetic Interference Mitigation in Industrial Ethernet Cabling

While standard and Industrial installations of Ethernet share many of the same characteristics, such as frame sizes, signal levels and data rates, there are significant differences as well. One of these is the physical environment in which the cabling system operates.   

2020 年 4 月 9 日

Industrial Ethernet vs. コマーシャル

We all know that Ethernet is the de facto physical layer communication protocol for data transmission between devices in a local area or wide area network. It has evolved over the years to deliver higher levels of performance while maintaining backwards compatibility, reliability and relatively low cost, which is why it has maintained its popularity.

2020 年 4 月 2 日

Testing Plug-Terminated Links—Internationally

The Modular Plug Terminated Link, or MPTL, where a horizontal cable run terminated on one end to an RJ-45 plug connects directly into a device, has become increasingly popular for connecting a variety of devices—from wireless access points and security cameras, to PoE lights and video displays—essentially wherever it’s deemed impractical or unsafe to deploy an outlet and equipment cord.

2020 年 3 月 26 日

規格の最新情報

Since the last standards update, I represented Fluke Networks and attended the TR42 meeting in New Orleans and the SC25 WG3 meeting in Sydney Australia. The following are some of the highlights worth noting.

2020 年 3 月 9 日

Make Sure Your Cabling Plant is Ready for Wi-Fi 6

Our last post covered the technologies for Wi-Fi 6 and 6E.  If you’ve decided that you want some of that good stuff in your network, you need to make sure your cabling plant is ready.

2020 年 3 月 5 日

So You Want to Upgrade to Wi-Fi 6?

In the first of this two-part post, we’ll discuss the new and upcoming Wi-Fi 6 standards and the performance benefits.  Our subsequent post will cover how to make sure that your cabling plant is ready.

2020 年 2 月 27 日

産業用イーサネット・ケーブルを詳しく紹介

Last month, we published a blog about the various industrial Ethernet connectors including M-series and some new small form factor connectors like the iX and emerging single-pair Ethernet connectors. But what good is a connector designed to withstand the industrial environment without a cable that offers the same protection?

2020 年 2 月 20 日

製造業におけるイーサネットケーブルの問題:MICE

Industrial Ethernet is very sensitive to delays caused by dropped or damaged data frames (sometimes called packets).  Just a few dropped or damaged packets can cause a machine to shut down.  These problems are often intermittent and can be caused by harsh industrial environments.

2020 年 2 月 13 日

BICSIウインター・カンファレンスの最新情報

Planning to attend the upcoming BICSI Winter Conference & Exhibition on February 9-13 at the Tampa Bay Convention Center in Tampa, FL?

Fluke Networks is offering plenty of educational opportunities to learn all about fiber, Industrial Ethernet and more.  And you can stop by the Fluke Networks’ Booth #310 during exhibiting hall hours for hands-on demonstrations and one-on-one time with our experts.

2020 年 2 月 6 日

挿入損失の課題とは

設計段階で挿入損失を慎重に計算し、取り付け後に永続リンクのテストに合格し、チャンネルがライブになった後にパフォーマンスの低下に直面したことはありますか?

2020 年 1 月 30 日